STANDARD MICROSYSTEMS CORPORATION

EtherCard PLUS Elite10T

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Linear bus

              Star
Wiring Type   Unshielded twisted pair

              AUI transceiver via DB-15 port
Boot ROM      Available

[Image]

                        NETWORK CARD CONFIGURATION

     I/O Base         IRQ          Base       JP1A      JP1B       JP1C
     Address                     Address

  »      280h          3         D0000h       Open     Closed      Open

         300h          5         CA000h       Open      Open      Closed

       Software     Software     Software    Closed     Open       Open
        setup        setup        setup

                             BOOT ROM ADDRESS

             Setting                      JP2A                JP2B

  »     Software Setup/Disabled          Closed               Open

                D8000h                    Open               Closed

[Image]

                             DIAGNOSTIC LED(S)

       LED               Status                     Condition

       LED1                On            Twisted pair network connection
                                                     is good

       LED1               Off            Twisted pair network connection
                                                    is broken

       LED2                On               Data is being transmitted

       LED2               Off             Data is not being transmitted

       LED3                On                Data is being received

       LED3               Off              Data is not being received